Leave Your Message
Standard Series Planetary Reducer

Standard Series Planetary Reducer

PLF series standard planetary gearboxPLF series standard planetary gearbox
01

PLF series standard planetary gearbox

2024-11-20

Inline configuration with square output flange.
Output shaft 10,14, 20,25,40 mm diameter.
Torque capacity range: 21 Nm through 900 Nm.
Standard planet gear set.
High performance, efficiencies asnd low acoustics.
Wide range of ratios from 3:1 up to 512:1.
Output bearings deliver radial load capacity as high as 4370 N, and axial capacities up to 2750 N.

Acceptance: OEM/ODM, trade, wholesale, etc.

If you are interested in our products, please contact us and we are always at your service.

If you need it, we can also provide free samples.

view detail
ZPT series standard planetary gearboxZPT series standard planetary gearbox
01

ZPT series standard planetary gearbox

2024-11-20

1.Inline arrangement with a square output flange.
2.Output shaft diameters: 16, 18, 22, and 32 mm.
3.Torque capacity ranges from 35 Nm to 170 Nm.
4.Standard planetary gear setup.
5.High performance, excellent efficiency, and low noise levels.
6.Wide selection of reduction ratios, from 3:1 to 350:1.
7.Output bearings provide radial load capacity up to 2700 N and axial load capacity up to 1350 N.

Acceptance: OEM/ODM, trade, wholesale, etc.

If you are interested in our products, please contact us and we are always at your service.

If you need it, we can also provide free samples.

view detail
ZPLF series standard planetary gearboxZPLF series standard planetary gearbox
01

ZPLF series standard planetary gearbox

2024-11-20

· Inline setup featuring a square output flange.
· Output shaft diameters: 10, 14, 20, 25, and 40 mm.
· Torque capacity ranges from 21 Nm to 900 Nm.
· Standard planetary gear configuration.
· High performance, excellent efficiency, and low noise levels.
· Broad selection of reduction ratios, ranging from 3:1 to 350:1.
· Output bearings provide radial load strength up to 4370 N and axial load capacity up to 2750 N.

Acceptance: OEM/ODM, trade, wholesale, etc.

If you are interested in our products, please contact us and we are always at your service.

If you need it, we can also provide free samples.

view detail
ZPLE series standard planetary gearboxZPLE series standard planetary gearbox
01

ZPLE series standard planetary gearbox

2024-11-20

1.Inline setup with a square output flange.
2.Output shaft diameters: 10, 14, 20, 25, and 40 mm.
3.Torque capacity spans from 21 Nm to 900 Nm.
4.Standard planetary gear arrangement.
5.High performance, excellent efficiency, and low noise levels.
6.Extensive selection of reduction ratios, from 3:1 to 350:1.
7.Output bearings provide radial load strength up to 4370 N and axial load capacity up to 2750 N.

Acceptance: OEM/ODM, trade, wholesale, etc.

If you are interested in our products, please contact us and we are always at your service.

If you need it, we can also provide free samples.

view detail
PLX series standard planetary gearboxPLX series standard planetary gearbox
01

PLX series standard planetary gearbox

2024-11-20

· Inline arrangement with a square-shaped output flange
· Output shaft diameters: 40, 55, 70, and 80 mm
· Torque capacity ranges from 310 Nm to 12,500 Nm
· Standard planetary gear system
· Excellent performance, high efficiency, and minimal noise levels
· Broad selection of reduction ratios, from 3:1 to 512:1
· Output bearings provide radial load capability up to 12,450 N and axial load capacity as high as 3,100 N

Acceptance: OEM/ODM, trade, wholesale, etc.

If you are interested in our products, please contact us and we are always at your service.

If you need it, we can also provide free samples.

view detail
PLFK series standard planetary gearboxPLFK series standard planetary gearbox
01

PLFK series standard planetary gearbox

2024-11-20
  • Inline setup with a square output flange
  • Output shaft diameters of 10, 16, 20, and 35 mm
  • Torque capacity spans from 16.5 Nm to 400 Nm
  • Standard planetary gear arrangement
  • Superior performance, high efficiency, and low noise
  • Extensive range of reduction ratios, from 3:1 to 512:1
  • Output bearings provide radial load strength up to 3200 N and axial load capacity reaching 3000 N



Acceptance: OEM/ODM, trade, wholesale, etc.

If you are interested in our products, please contact us and we are always at your service.

If you need it, we can also provide free samples.

view detail
PLE series standard planetary gearboxPLE series standard planetary gearbox
01

PLE series standard planetary gearbox

2024-11-20

Inline arrangement featuring a circular output flange.
Output shaft diameters: 10, 14, 20, 25, and 40 mm.
Torque handling range: from 21 Nm to 900 Nm.
Standard planetary gear mechanism.
Excellent performance, high efficiency, and minimal noise levels.
Extensive selection of ratios, ranging from 3:1 to 512:1.
Output bearings offer radial load capabilities up to 4370 N and axial loads reaching 2750 N.

Acceptance: OEM/ODM, trade, wholesale, etc.

If you are interested in our products, please contact us and we are always at your service.

If you need it, we can also provide free samples.

view detail